INSTRUMENTATION & CONTROL ENGINEERING

name of the department
course
Year of starting
level
1st year of approval by council
Year Wise Sanctioned Intake
Vision
Mission
Instrumentation & Control
BE
1994
UG
F-700/41/gj/(1)/rc/94,  11-07-1994
60
Name of the department Instrumentation & Control
Course BE
Year of starting 1994
Level UG
1st year of approval by council F-700/41/gj/(1)/rc/94, 11/07/1994
Year Wise Sanctioned Intake 60
Vision To impart eminence technical education in the field of Automation to meet the emerging technological needs of the industry and eco friendly solutions to society and at the same time upgrading the knowledge of faculty in cutting edge technology.
Mission 1. To provide quality education in the fields of Instrumentation & Control Engineering through effective teaching-learning process, well equipped laboratory facilities and collaborative ventures with industries.
2. Focusing the students to apply the essential principles of engineering in real industrial problems and to train them to solve any Industy Defined Automation problem.
3. To provide the students of IC engineering an environment of Academic freedom that will insure the exchange of ideas and the Dissemination of knowledge in this discipline.
4. To cultivate students in such a way that he/she can procure, design, implement, and successfully market the automation solution and product for any industry with eco friendly solutions.
Program Educational Objectives (PEOs) 1. To demonstrate multidisciplinary adoption of knowledge to use modern engineering tools, software and equipment for designing, analysis, implementation and maintenance of control System.
2. Apply the knowledge of Instrumentation & Control Engineering to solve problems Of social relevance, pursue higher education and research and entrepreneurship.
3. Instrumentation & Control Engineering Graduates will work effectively as Individual and as team members in multidisciplinary projects and industry.
4. Engage in lifelong learning, career enhancement and adapt to changing professional and societal needs.
Name Prof. M. J. Modi
desgination Professor
Qualification M.E.
Email address mjm7904@yahoo.com
Area of Interest Area of Interest : Advance Electronics, Advance drives and control
Name Prof. Mehul K Shah
desgination Associate Professor
Qualification Ph.D.
Email address Mkshah2000@yahoo.com
Area of Interest Area of Interest : Industrial Automation & Spectroscopy for food analysis
publication Publication :
  • Bhatt C. B., Shah Mehul, Manish Thakkar, Jaimin Dave; Conductivity Based Milk Adulteration Detection, International Journal of Current Engineering and Technology, Apr - 2014.
Achievement Achievement :
  • Dr S P Luthra gold medal.
Name Prof. Mukesh. M. Sharma
desgination Associate Professor
Qualification M.E.
Email address mukgita@rediffmail.com
Area of Interest Area of Interest : Automation, Embedded System And Process Control
publication Publication :
International Conference:
  • Prof. M.M.Sharma,Implementation of Low cost PIC16F873 based Real Time Embedded System (RTES) for Motor Operated Valve (MOV) in Process Control System, Paper N0.CIS-197, Page no.326-329 CISCON-2011(November 3-6, 2011).
  • Prof. M.M,.Sharma, Drt. Bhuvneshkumar Yadav A Novel Approach to Implement Analog Module of PIC16F873 as Position Controller in Motor Operated Valve (MOV), Paper No.146 in ICPCES-2014 during December 26-28, 2014.

National Conference:
  • Implementation of Low Cost Embedded System for Real Time Automation of Water distribution and Monitoring Network in prototype model town, MR. JAYDEEP.J.PATEL, 2 PROF. M. M. SHARMA, 3 PROF. V.M.PATEL 4 PROF. G.V.DIHORA ISBN No. 978-81-906220-3-, ICIKR-ETS-2012 PP n0.728-732
Name Prof. Manoj Khediya
desgination Assistant Professor
Qualification M.E.
Email address icmdk1@gmail.com
Area of Interest Area of Interest : PLC and DCS
publication Publication :
  • Krupa Narvekar, Mamta Patel, Prakash Pithadiya; "Effect of ADC Resolution on Process Plant Using Simulink " International Conference on System Dynamics & Control (ICSDC-2010) organized by Manipal Institute Of technology, Karnataka.
  • Mamta Patel, Aarti Yadav; DC MOTOR SPEED CONTROL USING FPGA; NUECON-2008 National Congeence organized by Nirma Institute of technology, Ahmedabad.
  • Aarti Yadav, Mamta Patel ,Prakash Pithadiya;Analysis AND SIMULATION OF EFFECTS OF ADC RESOLUTION ON PID CONTROLLER USING LABVIEW; ACC-2008 - National conference at Atmiya Institute of Technology, Rajkot.
  • Mamta Patel, Aarti Yadav ; "HIGH SPEED DATA ACQUSIITION SYSTEM USING FPSLIC" at ADIT JOURNAL OF ENGINEERING Volume:4,Page no:46 to 49, DEC.2007.
  • Aarti Yadav, Mamta Patel (2007); VLSI IMPLEMENTATION OF VARIATIONS IN SMPS SIGNAL UNDER DIFFERENT LOAD CONDITION" at IETE Vadodara.
Name Prof. Mamta V Patel
desgination Assistant Professor
Qualification M.E.
Email address mamtavp@gmail.com
Area of Interest Area of Interest : Control System, Digital Signal processing, Embedded system
publication Publication :
  • Krupa Narvekar, Mamta Patel, Prakash Pithadiya; "Effect of ADC Resolution on Process Plant Using Simulink " International Conference on System Dynamics & Control (ICSDC-2010) organized by Manipal Institute Of technology, Karnataka.
  • Mamta Patel, Aarti Yadav; DC MOTOR SPEED CONTROL USING FPGA; NUECON-2008 National Congeence organized by Nirma Institute of technology, Ahmedabad.
  • Aarti Yadav, Mamta Patel ,Prakash Pithadiya;Analysis AND SIMULATION OF EFFECTS OF ADC RESOLUTION ON PID CONTROLLER USING LABVIEW; ACC-2008 - National conference at Atmiya Institute of Technology, Rajkot.
  • Mamta Patel, Aarti Yadav ; "HIGH SPEED DATA ACQUSIITION SYSTEM USING FPSLIC" at ADIT JOURNAL OF ENGINEERING Volume:4,Page no:46 to 49, DEC.2007.
  • Aarti Yadav, Mamta Patel (2007); VLSI IMPLEMENTATION OF VARIATIONS IN SMPS SIGNAL UNDER DIFFERENT LOAD CONDITION" at IETE Vadodara.
Name Prof. Kamakshi Kaul
desgination Assistant Professor
Qualification M.Tech.
Email address kamakshikaul@vgecg.ac.in
Area of Interest Area of Interest : Process Instrumentation
publication Publication :
  • Sajid Patel, Mahammadsoaib Saiyad, Kamakshi Kaul, Pratik Panchal, " Electrical Feeder Monitoring and Control Laboratory Setup, Hardware Implementation using PLC & SCADA.", NCERTE-2016
  • Kamakshi Kaul, Chintan P. Shah, Namrata P. Joshi, Siddharth Kaul, " Laboratory Development For Programmable Logic Controller", Indian Journal of Technical Education, special edition for ICWSTCSC-2016, ISSN:9071-3034
  • Siddharth Kaul, Kamakshi Kaul, Parth Mehata, "USB Capabilities and Bootability of Portable Devices", IJSER Volume 5, Issue1, January 2014 Edition (ISSN2229-5518).
  • Chintan P. Shah, Namrata P. Joshi, Kamakshi Kaul, "Iris Features Analysis using ANN and SVM for detection of Diabetes" in NuiCONE-2012
  • Namrata P. Joshi, Chintan P. Shah, Kamakshi Kaul, " A Novel Approach Implementation of Eyelid Detection in Biometric Applications" in NuiCONE-2012 SCIENCE & ENGINEERING, Rohtak-january 2011
Name Prof. Swapna N. Shah
desgination Assistant Professor
Qualification M.E.
Email address Swapna6688@gmail.com
Area of Interest Area of Interest : Process control systems, VLSI design
publication Publication :
  • S.Y.Rathod, Dipali shah- FPGA Implementation of a coin box algorithm for vending machine INTERNATIONAL CONFERENCE ON SCIENCE & ENGINEERING, Rohtak-january 2011
  • S.Y.Rathod, Dipali shah Design and Implementation of vending machine using Verilog -INTERNATIONAL CONFERENCE ON ADVANCE IN COMMUNICATION, EMBEDDED SYSTEM & COMPUTING january 2011
Name Prof. Swati Y. Rathod
desgination Assistant Professor
Qualification M.E.
Email address swt.rathod@vgecg.ac.in
Area of Interest Area of Interest : Control System, Process Control
publication Publication :
  • S.Y.Rathod, Dipali shah- FPGA Implementation of a coin box algorithm for vending machine INTERNATIONAL CONFERENCE ON SCIENCE & ENGINEERING, Rohtak-january 2011
  • S.Y.Rathod, Dipali shah Design and Implementation of vending machine using Verilog -INTERNATIONAL CONFERENCE ON ADVANCE IN COMMUNICATION, EMBEDDED SYSTEM & COMPUTING january 2011
Name Prof. Nitin R. Prajapati
desgination Assistant Professor
Qualification M.E.
Email address nrp.prajapati@gmail.com
Area of Interest Area of Interest : Microcontrollers & PLC Programming
publication Publication :
  • S.Y.Rathod, Dipali shah- FPGA Implementation of a coin box algorithm for vending machine INTERNATIONAL CONFERENCE ON SCIENCE & ENGINEERING, Rohtak-january 2011
  • S.Y.Rathod, Dipali shah Design and Implementation of vending machine using Verilog -INTERNATIONAL CONFERENCE ON ADVANCE IN COMMUNICATION, EMBEDDED SYSTEM & COMPUTING january 2011
Name Prof. Parul S Trikar
desgination Lecturer ( Ad-Hoc)
Qualification B.E.
Email address parulstirkar@yahoo.com
Area of Interest Area of Interest : Power Electronics, Analog Signal Processing

Electonics and Circuit Design Lab

The Department is having an Electronic and circuit design lab for Analog and Digital Electronics hands on Experiments. Students use Electronic workbench, bread board, and Circuit trainer board to perform the Experiments.

Automation and Motion Control Lab

Department is having Automation and motion control lab where students can perform practical on Allen-Bradley PLC Trainer panel, SCADA trainer kit, Network Protocol Based Control System Trainer, Twin Rotor MIMO Control System, and Magnetic Levitation Control System. The objective of this lab is to familiarize in automation and different trainer kits.

Embedded System Lab

Department is having Embedded system lab where students have different trainer kits like microprocessor, microcontroller, PIC microcontroller, embedded trainer and AVR trainer kit. Embedded Laboratory is a laboratory in which we provide tutorials and projects from the field of Electronics.

Measurement and Transducer Lab

Measurement and transducer lab where students develop their basic project models using different sensors like Thermocouple/RTD/ Capacitive Level Sensors, CROs, Function generators, power supply and instrumentation work bench. This gives them hands on experience in designing and executing of circuits for real systems.

Computer Center

Department is having well equipped computer lab which provides the tools and technologies to students. High tech softwares like MATLAB, LabVIEW, Keil, Multisim-ultiboard, Pspice-sofware, PicoSoft, RS Logic 5000, SciLab.

Process Instrumentation and Calibration Lab

The Department has a Process Control and Calibration Laboratory. The main focus of the lab is to design and implement controllers for different processes and also modeling of the process elements in such a way that the system provides an optimum performance. Major equipments are like level trainer kit, pressure trainer kit, flow trainer kit, Multifunction Process Calibrator, Power Signal Analyzer, Multifunction Air Quality tester.

Biomedical and Soft Computing Lab

The Department has a Biomedical and soft computing lab where students have biomedical coverage like Bio Signal Amplifier, Defibrillator Demo, Digital Blood Pressure Measurement, Respiration Simulator, EMG/ ECG/EEG Simulator, Heart Rate Monitor, Phono-Cardiograph, Ultrasound Diathermy, Audiometer, External Pacemaker, Demo X-Ray Machine, Bio-Telemetry System.lab also have the computer facility for simulation.